Search
Forum
Wiki
Images
Files
Member List
Help
09-12-2016, 03:07 AM
Hello, gang. I'm Dyne. You may have seen my intro post on Astromech. If so, the rebeldroids-specific info will be at the end and you can skip a few paragraphs. 
I am a your typical geeky personage. I am a bit of a jack-of-all-trades, so over the years I've done 3D modeling and CAD, programming, electronics, 3d printing, and just general prop-building.
I am pretty far along with my first "droid" projects, which are Artie Deco from the old Hardware Wars spoof, and my own extrapolation of BB-8 into that setting (named BBL-BBQ). After finally talking to some of the droid builders at this year's Dragoncon, rather than merely admiring their droids at a distance, I finally decided that it was time to start building a proper Star Wars droid myself.
Naturally, I chose R2-D2.
*crickets chirp*
*someone coughs in embarrassment*
However, I know that that will be a loooong build, especially on my highly limited budget. Therefore, I wanted an easier/shorter/cheaper build to do while I research and plan R2, to help fend off the urge to rush things. Also, I wanted something that I could customize rather than worrying overmuch about screen accuracy.
Ever since ANH, my favorite "other" droid has been the WED Treadwell, which is probably as diverse a type as the Astromechs. So that is what I plan to work on. Most likely I'll be incorporating a fair amount of 3D printing above the base, so it's good to see people already working on that.
I am a your typical geeky personage. I am a bit of a jack-of-all-trades, so over the years I've done 3D modeling and CAD, programming, electronics, 3d printing, and just general prop-building.
I am pretty far along with my first "droid" projects, which are Artie Deco from the old Hardware Wars spoof, and my own extrapolation of BB-8 into that setting (named BBL-BBQ). After finally talking to some of the droid builders at this year's Dragoncon, rather than merely admiring their droids at a distance, I finally decided that it was time to start building a proper Star Wars droid myself.
Naturally, I chose R2-D2.
*crickets chirp*
*someone coughs in embarrassment*
However, I know that that will be a loooong build, especially on my highly limited budget. Therefore, I wanted an easier/shorter/cheaper build to do while I research and plan R2, to help fend off the urge to rush things. Also, I wanted something that I could customize rather than worrying overmuch about screen accuracy.
Ever since ANH, my favorite "other" droid has been the WED Treadwell, which is probably as diverse a type as the Astromechs. So that is what I plan to work on. Most likely I'll be incorporating a fair amount of 3D printing above the base, so it's good to see people already working on that.
