Search
Forum
Wiki
Images
Files
Member List
Help
02-17-2018, 09:10 AM
Have been busy with work lately, not much building but at least I printed the flat pack and made a first test with cardboard.
I am now decided to build this sentry droid: I like the shape, the holonomic drive and am now really decided to explore autonomous droid so H0-15 is the perfect choice.
I will get the skirt laser cut. I may weld the corners or make some 3D printed parts, not sure yet.
I am now testing a CR-10 S5 that I intend to use to 3D print HO-15 top 3 main elements, each in one-piece: body, lower head and upper head.
Before investing time into my own 3D design I was wandering if somebody had already released a 3D model based on SC's flatpack that could be used for 3Dprinting?
I am now decided to build this sentry droid: I like the shape, the holonomic drive and am now really decided to explore autonomous droid so H0-15 is the perfect choice.
I will get the skirt laser cut. I may weld the corners or make some 3D printed parts, not sure yet.
I am now testing a CR-10 S5 that I intend to use to 3D print HO-15 top 3 main elements, each in one-piece: body, lower head and upper head.
Before investing time into my own 3D design I was wandering if somebody had already released a 3D model based on SC's flatpack that could be used for 3Dprinting?