Fusion Generator:Kresty Style Build:Parts List

From Rebeldroids Wiki

Revision as of 02:12, 13 December 2017 by Kresty (talk | contribs)

Back to Kresty Style Build guide page.

Parts List

There are a few groups of parts needed for this build. This list is based on the parts used by Kresty for Kresty's Build.

3D Printed Parts

The 3D printed Parts are discussed in more detail on the [[Fusion Generator:Kresty Style Build:3D Parts|3D Parts Page].

Top

  • 1 Top Cap
  • 11 Top Segments. (typically 5 double and 1 single segment)
  • 11 Top Coil Sockets
  • 11 Top Coil Mounts
  • 11 Heatsinks (1 piece with support or 3 pieces without support)

Base

  • 16 Buttons (E Band)
  • 8 Round Caps (E Band)
  • 8 Lower Hose Long Nipples (E Band)
  • 8 Lower Hose Short Nipples (G Band)
  • 8 Upper Hose Main Mounts (I Grill)
  • 8 Upper Hose Tee Mounts (M Ring) (2 part with nipple)

Optional

  • 11 Vanes (instead of laser cut)

Laser Cut "Flat Pack" Parts

The Flat Pack parts are also discussed in more detail on the Flat Pack Styrene Parts Page.

  • 1 A base
  • 8 B supports (either normal or extended height)
  • 4 C half bands - Optional extended height lower band
  • 1 D ring - Optional for extended height build
  • 2 E half bands
  • 1 F ring
  • 2 G third & half bands
  • 1 H ring
  • 2 H1 half rings
  • 2 I grill halves
  • 18 J grill rib halves (for 9 J rings)
  • 1 J-top grill ring.
  • 2 K half rings
  • 1 L window strip
  • 1 M Top Ring
  • 11 Vanes for top fan

Optional:

  • 8 E² E Band squares (instead of 3D printed round parts)

Additional

Retrieved from "http://www.rebeldroids.net/wiki/index.php?title=Fusion_Generator:Kresty_Style_Build:Parts_List&oldid=182035"