Difference between revisions of "Fusion Generator:Kresty Style Build:Base"

From Rebeldroids Wiki
Line 1: Line 1:
 
Back to [[Fusion Generator:Kresty Style Build#Sections_to_This_Guide|Kresty Style Build]] guide page.
 
Back to [[Fusion Generator:Kresty Style Build#Sections_to_This_Guide|Kresty Style Build]] guide page.
  
−
This is the base section of the fusion generator, the laser cut Styrene parts.  Shown here without the greeblies.
+
This is the base section of the fusion generator, the laser cut Styrene parts.  Shown here without the 3D printed greeblies.
  
 
<img src="http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Base_Construction_28229.jpg" width="400">
 
<img src="http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Base_Construction_28229.jpg" width="400">
  
 
Note that Kresty built a too-tall version with extra C band and D ring - those aren't in the newer V3 plans, so ignore that bottom vertical section.
 
Note that Kresty built a too-tall version with extra C band and D ring - those aren't in the newer V3 plans, so ignore that bottom vertical section.
 +
 +
Before assembly, it is important to determine where you want to [[Fusion Generator:Kresty Style Build:Removing Top|remove the top]].  Between the Grill and the Base is s decent choice.
 +
 +
== Fusion Generator Base ==
 +
The base consists of the A disc, E, H & H1 rings, with the E and G bands strapped around it.  The bands have 3D greebles.  After painting, the [[Fusion Generator:Kresty Style Build:Lower Hoses|Lower Hoses]] are added.  We have an [[Fusion Generator:Kresty Style Build:Alignment Template|Alignment Template]] to help mark the greeblie positions.
  
 
<img src="http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Template_for_Fusion_Generator_28129.jpg" width="400">
 
<img src="http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Template_for_Fusion_Generator_28129.jpg" width="400">
  
 +
Start by placing the B supports on the A disc and test fitting the E & H rings.  In this picture I have also placed some of the grill parts, and, as noted I have an extra D ring that isn't in the V3 plans.
 +
 +
<img src="http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Test_Fit_Base.jpg" width="400">
  
 
Pros and Cons of where to [[Fusion Generator:Kresty Style Build:Removing Top|separate the top]].
 
Pros and Cons of where to [[Fusion Generator:Kresty Style Build:Removing Top|separate the top]].

Revision as of 18:32, 24 December 2017

Back to Kresty Style Build guide page.

This is the base section of the fusion generator, the laser cut Styrene parts. Shown here without the 3D printed greeblies.

Note that Kresty built a too-tall version with extra C band and D ring - those aren't in the newer V3 plans, so ignore that bottom vertical section.

Before assembly, it is important to determine where you want to remove the top. Between the Grill and the Base is s decent choice.

Fusion Generator Base

The base consists of the A disc, E, H & H1 rings, with the E and G bands strapped around it. The bands have 3D greebles. After painting, the Lower Hoses are added. We have an Alignment Template to help mark the greeblie positions.

Start by placing the B supports on the A disc and test fitting the E & H rings. In this picture I have also placed some of the grill parts, and, as noted I have an extra D ring that isn't in the V3 plans.

Pros and Cons of where to separate the top.

Back to Top Assembly

Back to Middle Grill Assembly

Forward to Top Coils

Back to Kresty Style Build guide page.

Retrieved from "http://www.rebeldroids.net/wiki/index.php?title=Fusion_Generator:Kresty_Style_Build:Base&oldid=182096"