Difference between revisions of "Fusion Generator:Kresty Style Build:Top"

From Rebeldroids Wiki
Line 1: Line 1:
 
Back to [[Fusion Generator:Kresty Style Build#Sections_to_This_Guide|Kresty Style Build]] guide page.
 
Back to [[Fusion Generator:Kresty Style Build#Sections_to_This_Guide|Kresty Style Build]] guide page.
 +
 +
The top contains primarily 3D printed parts.  It may vary a little depending on where you want to [[Fusion Generator:Kresty Style Build:Removing Top|remove the top]].  Savage Creature's plans have ring M just below the 3D printed top segments, with the intent of removing the top from the M ring to access the inside.  Kresty messed up and glued the ring to the top segments, so he left the J-top and K rings unglued so it can be removed there.
 +
 +
<img src="http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Test_Fitting_Hoses_28229.jpg" width="300">
 +
 +
If you build one, please share, we'd love to see pictures!
 +
 +
  
  
−
[[Fusion Generator:Kresty Style Build:Removing Top]]
 
  
  

Revision as of 16:22, 24 December 2017

Back to Kresty Style Build guide page.

The top contains primarily 3D printed parts. It may vary a little depending on where you want to remove the top. Savage Creature's plans have ring M just below the 3D printed top segments, with the intent of removing the top from the M ring to access the inside. Kresty messed up and glued the ring to the top segments, so he left the J-top and K rings unglued so it can be removed there.

If you build one, please share, we'd love to see pictures!




Back to Kresty Style Build guide page.

Forward to Base Assembly

Retrieved from "http://www.rebeldroids.net/wiki/index.php?title=Fusion_Generator:Kresty_Style_Build:Top&oldid=182079"