Search
Forum
Wiki
Images
Files
Member List
Help
11-28-2022, 12:11 PM
(This post was last modified: 11-28-2022, 12:14 PM by Imadesignerd.
Edit Reason: Added some things for clarity
)
Started assembly today as I finish printing the last few parts for the build. I really need to get my printer tuned in tighter. These parts are going to need some filing to fit snugly. Aw well. All part of the fun I guess.
Just some simple CA glue and patience.
Pro Tip: Use tape on the backside of the joints and slots to prevent glue seeping through.
I taped the pieces together, turned it over, folded the pieces open along the seam just a bit to open a crack, put glue in the crack between the two and folded them back together to close the seam. Wait and bit and wipe the excess from the surface. Worked well.
![[Image: dZjuNev.jpg]](https://i.imgur.com/dZjuNev.jpg)
![[Image: xnJi9CG.jpg]](https://i.imgur.com/xnJi9CG.jpg)
Just some simple CA glue and patience.
Pro Tip: Use tape on the backside of the joints and slots to prevent glue seeping through.
I taped the pieces together, turned it over, folded the pieces open along the seam just a bit to open a crack, put glue in the crack between the two and folded them back together to close the seam. Wait and bit and wipe the excess from the surface. Worked well.