Treadwell WED-15-77 build : JamesF

[Jaffa007]

Friday I set the works 3D printer off with lots of different pieces, including the last two mast parts.

So tomorrows progress will be, gluing the sections together using the PVC tube as a guide for centralising and squareness. Some of the inner diameter’s do still need a bit of filing to make things easier to slide over it. But once done I can glue them all up, I’ll spray primer over the joins and leave to dry.

I’ll be setting up the printer to do the base stand , in ABS. I’ll start it in the day so I can keep an eye on its progress. Any problems and I will hopefully be able to catch in time.


Sent from my iPhone using Tapatalk