Search
Forum
Wiki
Images
Files
Member List
Help
I wanted a little more detail on the top greeblies, so I have some printed parts we worked on. One consideration is how to allow the pipes to dry out. After we assemble these, they'll get more paint.
The key bit still missing here is that I need to finish designing the blocks that hold the board to the car's rails.
![[Image: normal_Have_More_Parts__28329.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Have_More_Parts__28329.jpg)
Printed a few things for the top greeblies
This cap is 2 parts so I don't have to use supports to print (center post is separate). Holes in the cap so if it rains it has a chance of drying.
![[Image: normal_Have_More_Parts__28229.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Have_More_Parts__28229.jpg)
End greeblie round caps printed
The 3D model's end details had round tops, so I printed some. Holes to allow water to dry.
We probably also want to put some putty or otherwise improve some of the "wood" texture that's currently visible through the paint. Probably won't paint these bits 'til we get that done too.
The key bit still missing here is that I need to finish designing the blocks that hold the board to the car's rails.
Printed a few things for the top greeblies
This cap is 2 parts so I don't have to use supports to print (center post is separate). Holes in the cap so if it rains it has a chance of drying.
End greeblie round caps printed
The 3D model's end details had round tops, so I printed some. Holes to allow water to dry.
We probably also want to put some putty or otherwise improve some of the "wood" texture that's currently visible through the paint. Probably won't paint these bits 'til we get that done too.