Fusion Generator / Reactor?

[savagecreature]

Ok, I'm confused (here I am asking more questions and you haven't had a chance to reply to the last

Here, there's a band around the very bottom, then a sloped band, then after the ring, another smaller band.



And looking at the parts here:


I see the slopey band on the right, the two curves.
And it seems like the long bands on the right are each the right length to fit the diameter of the band above the slopey one.
And it seems like the 4 bands in the middle are 1/2 the diameter of the band on the bottom...

So: I'm confused.  That seems like there are extra copies of those two bands?  Or did you double them up?  Or am I missing ???

what question did I not answer? Did I miss one?

the four bands are two bands cut in half because my CnC isn't long enough to cut them. They're the band goes around the bottom, I'm fairly sure. (the one I built is over at the lab, so I can't refresh my memory)  The long bands are the next band up. Both of them are two layers.

I won't get back to the lab until wednesday, but I'll snap some photos for clarification when I get there.