Search
Forum
Wiki
Images
Files
Member List
Help
10-24-2019, 03:01 PM
(This post was last modified: 10-24-2019, 03:58 PM by savagecreature.)
I went ahead and started a new thread for all of this so people will have a place to give feedback were I can find it and I can post images and such to explain things (where other people can find it!)
Feedback is always nice (I'm starved for attention). If you find something inaccurate, show me a photo or something and I will try to get it fixed or maybe we'll alter it and have two versions. If the piece doesn't print well and you think it would work better if I did it differently, let me know and we'll figure something out together. Something too thin? well, you get the idea.
Here are a couple of images of my model of the DRK-1 while it's still in the computer. It should at least give you some idea of what it's supposed to look like
![[Image: normal_drk_front.PNG]](http://rebeldroids.net/gallery/albums/userpics/10002/normal_drk_front.PNG)
![[Image: normal_drk_back.PNG]](http://rebeldroids.net/gallery/albums/userpics/10002/normal_drk_back.PNG)
![[Image: normal_sploded~0.PNG]](http://rebeldroids.net/gallery/albums/userpics/10002/normal_sploded~0.PNG)
Feedback is always nice (I'm starved for attention). If you find something inaccurate, show me a photo or something and I will try to get it fixed or maybe we'll alter it and have two versions. If the piece doesn't print well and you think it would work better if I did it differently, let me know and we'll figure something out together. Something too thin? well, you get the idea.
Here are a couple of images of my model of the DRK-1 while it's still in the computer. It should at least give you some idea of what it's supposed to look like
The Front
The Back
It's always easy to make the model. Never as easy to make it so it can actually be built in the real world. I try very hard to imagine every detail of assembly as I'm creating each individual part, but sometimes I still get it wrong. If you get to a point where you're like, "I can't get that part on because I glued this other part on and it blocks it" that's another thing I'd love to hear about. We'll do a redesign and see if the problem can be solved.
I'm like every designer since designers started designing things. I hate writing assembly instructions. That's another thing I'd love the community's assistance with as things develop.
Here's an exploded view. It's missing the two outer spheres. I would love to add some things to the design so it could be opened up again after assembly so you could put electronics on the inside and be able to change batteries, collect a memory card, adjust something or other . .
Here's an exploded view. It's missing the two outer spheres. I would love to add some things to the design so it could be opened up again after assembly so you could put electronics on the inside and be able to change batteries, collect a memory card, adjust something or other . .
![[Image: normal_sploded~0.PNG]](http://rebeldroids.net/gallery/albums/userpics/10002/sploded~0.PNG)
Exploded View
So this is the deal. I just went to the directory with all of the most recent versions of the printable files and threw 'em into a zip and uploaded 'em. There might be duplicates, there might be more than one version of a part, something might be missing. I don't think they're even named properly. I just wanted to get something out there so people could start looking at them and/or working with them. I will review and revise in the future as needed.