Search
Forum
Wiki
Images
Files
Member List
Help
03-22-2018, 06:11 PM
If you use the "Shawn's 3D Model Flat Pack" PDF file from my "rough 3d model", then each page of that file should print at 100% - which may require big paper or tiling for several of the pages. Acrobat's good about providing options for 100% scale.
I also have dimensions marked on many of those.
Note that I didn't adjust for the width of the material, so it may need some trimming to assemble, but it should be pretty close with thin material.
If you're using a CnC or laser, then (obviously) only cut the black lines, not the marks for the scale.
![[Image: thumb_Rough_3D_Model.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/thumb_Rough_3D_Model.jpg)
Shawn's 3D Model of H015 Sentry Droid
This is a fairly accurate 3D model of the outer shell of the sentry droid. It is provided in several formats.
Additionally, there's a "flat" PDF (& cdr) of the panels which can be printed at 100%. Note, however, that the panels are the front faces and don't account for the depth of whatever material you might cut, so you'll either need to cut them a hair smaller, or sand/fill, etc. if you try to use those to build a model.
The "skirt" fits over the Lego greeblies in this version.
I also have dimensions marked on many of those.
Note that I didn't adjust for the width of the material, so it may need some trimming to assemble, but it should be pretty close with thin material.
If you're using a CnC or laser, then (obviously) only cut the black lines, not the marks for the scale.
Shawn's 3D Model of H015 Sentry Droid
This is a fairly accurate 3D model of the outer shell of the sentry droid. It is provided in several formats.
Additionally, there's a "flat" PDF (& cdr) of the panels which can be printed at 100%. Note, however, that the panels are the front faces and don't account for the depth of whatever material you might cut, so you'll either need to cut them a hair smaller, or sand/fill, etc. if you try to use those to build a model.
The "skirt" fits over the Lego greeblies in this version.