Wingspan's Baby GONK Build

[Wingspan]

The BG's electronics are about as simple as it gets.  I pulled the dollar store Christmas decorations apart and all the flashing/blinking action is entirely within the LED's themselves.  All I needed to do was supply 3v and a way to turn them on/off.  The flashlights I cut apart for the "Hp's"  had 3 AAA battery holders.  I only needed two batteries to supply 3v, so I tapped the battery holder after the second AAA.  The holder is then zip tied inside the upper body half:





The LED's were hot glued into the Hp's and wired to the batteries through a rocker switch on the back of the droid:



Electronics done, time for final assembly!