How to build a Cheap Gonk Droid

[brezjim]

Well I never made a build log for my astromech I had pics but never made the log. So I figured I would make a Gonk Droid. And this time contribute and make a log. However I kinda busted it out in one day but I did take pictures so let me explain the process. In my estimate the project cost about 100 bucks or less I didn't keep track. By the way this Gonk is not screen accurate it is just what I like and wanted


Step 1: Buy stuff the stuff I bought is 2 big cases and 2 inch 2 foot long pvc pipe. And 2 smaller cases for the feet because my wood cutting skills suck and im lazy. And 2 gutter things I found to go around the pvc pipe.

   

Step 2: paint at first I pained it a brown I did not like so I scarped it off and made a red but did a crapy job scraping so it kinda looks weathered but here is pics of the original paint job I used a paint at home depot that was a primer paint and goes on everything

   

[url=http://astromech.net/forums/attachment.php?attachmentid=39259&d=1478736711][/url]Step 3: I am a auto mechanic by trade so I saved some parts that were broken on cars that I replaced and thought might fit on the gonk droid. I like to call it recycling lol and I got these boxes at the craft store that I thought might fit it

   

Step 4. I used a stencil cutter that heats up I guess that's the name I got it years ago and traced circles of the pvc pipes on my boxes and cut the holes. Then I shoved the pvc pipes in with the gutter things around them. and cut a piece of wood and put holes in it as well for alittle more support on the body and feet