WED-15-ST68 Septoid Droid

[Paul6700]

The WED-15-ST68 name came from Wookiepedia as the name associated with the droid at the sale scene. I am not sure where the Septoid name came from as the droid clearly has eight arms.

On to the mast:

3-inch ABS pipe for the main mast with a 3D printed part for the base of it and the top of it.

[img]<a data-flickr-embed=[/img]" />

The mast topper topper is the same from the video of the head only larger. The partial mast I used in the head video was too small. 
[img]<a data-flickr-embed=[/img]" />

The main plate is a 15-inch wood disk with 3D printed details for everything else.

[img]<a data-flickr-embed=[/img]" />


Used aluminum rod for all the wire pieces that make up the supports for the legs.

[img]<a data-flickr-embed=[/img]" />

Here is a little tease of an arm attached to the base. I wanted to see how the wire supports would hold the arm in position.

[img]<a data-flickr-embed=[/img]" />

Also needed to add fake pneumatic cylinders and know how long to make them. 

[img]<a data-flickr-embed=[/img]" />

Paint to the wire parts.

[img]<a data-flickr-embed=[/img]" />

Mounted the neck motor under the orange topper in the same way as before. Got all the wires mounted as well.

[img]<a data-flickr-embed=[/img]" />

Next up will be arms.