GOUD-4 mouse droid - ‘Solo’ film

[Jaffa007]

Blog link: https://goud4mousedroid.blogspot.com

Started this project a few years back before it got shelved. Then a new lease of life began this year with being able to 3D print parts needed and some free wood

Posted #8 Blog updates so far, also a thread on the mouse droid forum
Here’s some progress picture so far:

Car is a Schumacher SST.....model not 100% sure lol.


Lower wood sections glued together with PVA glue. These will be strengthened later with fibreglass.

Using the ‘draft’ plans, I drew up in CAD the front panel. After a few changes, I came up with this...

The grey ring is a push fit to hold a cabochon in place. I’ll probably draw up a version that has a solid 3D dome included. The filler primer is a must

Once sanded smooth, the ‘wet gloss effect’ from spraying Matt black tho looks impressive.

Once (almost) dried it still looked good.

Re-fitted the cabochon and the sprayed retaining ring.


Next up is the frame and shell.


Sent from my iPhone using Tapatalk