Search
Forum
Wiki
Images
Files
Member List
Help
08-25-2019, 09:40 AM
Working on the toolbox some. Hope the mottled colors look OK to folks.
There are a few 1x4's missing from the top (on order), but the other holes are intentional, figured it's like chipped paint.
Top edge is still only about 1/4 of the way done
About where it goes over the wheels
![[Image: normal_Toobox_Droid_Top_28329.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Toobox_Droid_Top_28329.jpg)
Lego Toolbox Droid Top Platform Construction
Holding the top of the droid over the wheels about where it goes.
One of the tracks is pretty much done.
Second track was missing one of the drive wheel rims. Not entirely sure what happened to it (it was red in previous photos, so I know it used to exist). Reprinting is a decent test of the CR-10 enclosure.
![[Image: normal_Toolbox_Printing_Wheel.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Toolbox_Printing_Wheel.jpg)
Lego Toolbox Droid Printing Last Wheel
Somehow one of the wheels got missing. Good test of the new cabinet for the CR-10, my Flashforge isn't big enough for this. Worked well until I decided it was done a little too soon. (It'll be usable though).
![[Image: normal_Toobox_Droid_Top_28529.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Toobox_Droid_Top_28529.jpg)
There are a few 1x4's missing from the top (on order), but the other holes are intentional, figured it's like chipped paint.
Top edge is still only about 1/4 of the way done
![[Image: normal_Toobox_Droid_Top_28429.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Toobox_Droid_Top_28429.jpg)
About where it goes over the wheels
Lego Toolbox Droid Top Platform Construction
Holding the top of the droid over the wheels about where it goes.
One of the tracks is pretty much done.
![[Image: normal_Toolbox_Droid_Drivetrain.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Toolbox_Droid_Drivetrain.jpg)
Second track was missing one of the drive wheel rims. Not entirely sure what happened to it (it was red in previous photos, so I know it used to exist). Reprinting is a decent test of the CR-10 enclosure.
Lego Toolbox Droid Printing Last Wheel
Somehow one of the wheels got missing. Good test of the new cabinet for the CR-10, my Flashforge isn't big enough for this. Worked well until I decided it was done a little too soon. (It'll be usable though).