3PO build

[Conqueror_Worm]

Huh. They have a brass plating kit.  It never occurred to me to look for one, I assumed you couldn't plate an alloy.

Testing a C-3PO glove that was 3D printed in Thermoplastic PolyUrethane (TPU). It passes the "use the comlink" test around 1 in 4.
3D file by RoelVeldhuyzen



If the above video doesn't work, try this link.



One last little update:

The knee joint is really hard to bend, I'll need to figure out a way to reduce the friction, guessing it involves many hours of sanding.
Leg by Jesse_M
Foot by TKCC71