Search
Forum
Wiki
Images
Files
Member List
Help
I designed the drive platform to fit inside the LEGO greeblies. Since the body of the droid is pretty light, it's made from 1/4 plywood and the corners are notched out enough the have the omni wheels clear the inner face of the greeblies. I installed a C-Channel chris-crossed on top and bottom to stiffen the board
Motor:https://www.amazon.com/gp/product/B01KTZ...UTF8&psc=1
(see my 5/12/19 post with the updated motor information)
Motor Mount Brackets:https://www.amazon.com/gp/product/B06VT8...UTF8&psc=1
The 5 inch tall carriage bolts are for the battery hold down bracket and for mounting the body to the lower section. The 2 shorter bolts are for mounting the electronics board.
Motor:https://www.amazon.com/gp/product/B01KTZ...UTF8&psc=1
(see my 5/12/19 post with the updated motor information)
Motor Mount Brackets:https://www.amazon.com/gp/product/B06VT8...UTF8&psc=1
The 5 inch tall carriage bolts are for the battery hold down bracket and for mounting the body to the lower section. The 2 shorter bolts are for mounting the electronics board.