DRK-1 Probe Droid

[kresty]

Ack, I hate it when that happens.  I don't have a cooling fan, and it was hit-or-miss at first to figure out what temps caused the filament to mess up my PTFE tube - (I bought a bunch of extra tube from China the right diameter so now when I screw it up I can just chop off a new bit - my tube is removable, I think it's a 3mm extruder retrofitted (by adding a tube) to 1.75).

Anyway, hope it works.  Note that Savage's original front body piece has a rounded edge, making it hard to print.  (I just got it started today).

You might look at recent files I've added, that lip might be flatter and be a better start for the hemisphere.