Search
Forum
Wiki
Images
Files
Member List
Help
12-03-2017, 06:00 PM
So I went to drill the hole for my "fun" 1/4" socket/cord idea, and, of course, the location I chose was one of only 8 spots that has a support right in the middle of it!
Lesson: If you want to drill holes for sockets & stuff, plan ahead!
Of course, that meant I had to dig out the support. Given how tight it (and how big the interior bit of socket was), that invariably meant I made the hole too big. There were still a couple of points it touched, so I CA'd the socket into place and then bondo'd the hole.
Lesson: If you want to drill holes for sockets & stuff, plan ahead!
![[Image: normal_Support_in_Socket_hole_Needed_Repair.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Support_in_Socket_hole_Needed_Repair.jpg)
Of course, that meant I had to dig out the support. Given how tight it (and how big the interior bit of socket was), that invariably meant I made the hole too big. There were still a couple of points it touched, so I CA'd the socket into place and then bondo'd the hole.
![[Image: normal_Support_in_Socket_hole_Needed_Repair_28129.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10017/normal_Support_in_Socket_hole_Needed_Repair_28129.jpg)