Search
Forum
Wiki
Images
Files
Member List
Help
03-06-2017, 08:26 PM
Printer number second:
Flash Forge Creator Pro
![[Image: normal_fashForgeCreatorPro.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10002/normal_fashForgeCreatorPro.jpg)
Flash Forge Creator Pro
(sorry for the lousy photo)
This is a great printer. As you can see by all the plastic, tools, and debris in the print area, I use it constantly and do a poor job of cleaning up after myself. (I'm going to have to clean it now, out of shame) The prints are consistently of good quality, the time estimates are accurate and usually a significant amount faster than a number of the other printers. The dual heads are nice. If nothing else when one jams you can switch to the other if you need a print right away and can't take the time to clear the jam. (something that happens to us during competition season) It's versatile, being able to print multiple different plastics on a heated bed. I wish the print area was a little bigger, but all in all a solid printer.
This is a great printer. As you can see by all the plastic, tools, and debris in the print area, I use it constantly and do a poor job of cleaning up after myself. (I'm going to have to clean it now, out of shame) The prints are consistently of good quality, the time estimates are accurate and usually a significant amount faster than a number of the other printers. The dual heads are nice. If nothing else when one jams you can switch to the other if you need a print right away and can't take the time to clear the jam. (something that happens to us during competition season) It's versatile, being able to print multiple different plastics on a heated bed. I wish the print area was a little bigger, but all in all a solid printer.