Search
Forum
Wiki
Images
Files
Member List
Help
Hmm, that's looking good, wonder where the extra 1" comes from?
Seems odd though, we "know" how big the head is at the top & middle. Doesn't seem like much room for error there.
I wonder if this helps at all? Pretty close to edge-on. Bottom of the head is to the outside of the top of the head. And the "neck" looks like the same width on the top of the body & bottom of the head.
![[Image: normal_front.jpg]](http://www.rebeldroids.net/gallery/albums/userpics/10002/normal_front.jpg)
How tall is your 3D model? Did you see my guess of 23.5" based on Lara's lightsaber? http://www.rebeldroids.net/forum/showthr...63#pid1763 - unfortunately that's not a very precise estimate. Also that's from the floor, so whatever bit of the faux wheels is between the skirt bottom and floor.
(09-03-2016, 09:39 PM)savagecreature Wrote: I used the same image so generously provided by kresty (as all of the best images have been) 'cause it looked like a good one. It's not a perfect match, but a pretty good one. This 3D format isn't compatible with the plans, so there'll be some conversion required, etc.
The bad news is, however, with the current head this new proportion only gets an inch closer to the indicated 25. This one is 23.8 (the current published plans are 22.8) I guess I'll have to take another look at the head and see what I can see.
Seems odd though, we "know" how big the head is at the top & middle. Doesn't seem like much room for error there.
I wonder if this helps at all? Pretty close to edge-on. Bottom of the head is to the outside of the top of the head. And the "neck" looks like the same width on the top of the body & bottom of the head.
How tall is your 3D model? Did you see my guess of 23.5" based on Lara's lightsaber? http://www.rebeldroids.net/forum/showthr...63#pid1763 - unfortunately that's not a very precise estimate. Also that's from the floor, so whatever bit of the faux wheels is between the skirt bottom and floor.