MSE-6 Build notes

[Roger Booth]

I'll be working with two R/C chassis now.
First car was too wide at the front wheels, they would be sticking out from under the wheel arches way too far so I got a second chassis with a narrower width at the front, I'll cut down the middle and join up with the rear from the first car.

First car chassis
   

   

Second car chassis with narrower front wheel width
   

   

Might be settling on fibre glass/carbon fibre sheets for the chassis and remount everything needed from the two cars onto one frame. 
Not sure if this will work but I'll give it a go.