Rebel Droids.net
Treadwell blog - Printable Version

+- Rebel Droids.net (http://www.rebeldroids.net/forum)
+-- Forum: Droid Discussions (http://www.rebeldroids.net/forum/forumdisplay.php?fid=6)
+--- Forum: WED Treadwell droid (http://www.rebeldroids.net/forum/forumdisplay.php?fid=22)
+--- Thread: Treadwell blog (/showthread.php?tid=585)



Treadwell blog - CmndrFalken - 05-09-2021

Http://www.facebook.com/kcdroidtreadwell


RE: Treadwell blog - kresty - 05-11-2021

Cool!


RE: Treadwell blog - CmndrFalken - 07-29-2021

Figured I would update with some new photos! Lots of paint and finish to go but making progress.

[Image: 219060589_146341677622616_88120052609617...e=61297BFE]



[Image: 219538863_141012164822234_26702362267542...e=61290494]


RE: Treadwell blog - xingshen71 - 07-29-2021

Looking good!

What paint color is on the base?


RE: Treadwell blog - CmndrFalken - 07-30-2021

(07-29-2021, 08:19 PM)xingshen71 Wrote: Looking good!

What paint color is on the base?

It actually isn't paint on the base at all.  It is a plastic film used for RC airplanes called Monokote.  This particular color of Monokote is called insignia blue.   I went to sherwin williams and got a matching color for the part that sits on top of the base with the exhaust ports.  I will also paint the head the same color.  


I use a sealing iron on the backside of the piece to secure the Monokote then use a heat gun on the front that provides the mirror finish you are seeing.  

Hope that helps.

P.S.  I will also be using strips of Monokote to seal the cracks up between the base pieces.  I have a ton of finish work left.

Tony


RE: Treadwell blog - kresty - 08-10-2021

Monokote's a good idea for this kind of thing. I haven't heard of that being used on others, but it's kind of an obvious material to consider in hindsight. Any trouble keeping bubbles out?


RE: Treadwell blog - CmndrFalken - 08-11-2021

Basically the heat gun takes out all wrinkles once the edges are tacked down to the back of the pieces.   



sneak peak with the old head on a pipe for orientation.   The rest of the center stalk is in paint still.

[Image: 236134082_157966646460119_84758072257738...e=61399D8E]

[Image: 235690984_157966696460114_39571116477160...e=613889B1]

[Image: 236274915_157966593126791_51755217220141...e=61379F7D]


RE: Treadwell blog - CmndrFalken - 08-17-2021

Come see 327 at Planet Comic Con in Kansas City this weekend!

After 10 years and 4 revisions he is finally assembled (minus tracks).

[Image: 238838911_10162307079824619_733380487719...e=61405B47]


RE: Treadwell blog - savagecreature - 08-18-2021

Lookin' good! Thanks a lot for sharing some images!