Toolbox Droid 3D Model - Printable Version +- Rebel Droids.net (http://www.rebeldroids.net/forum) +-- Forum: Droid Discussions (http://www.rebeldroids.net/forum/forumdisplay.php?fid=6) +--- Forum: Publish Notifications (http://www.rebeldroids.net/forum/forumdisplay.php?fid=33) +--- Thread: Toolbox Droid 3D Model (/showthread.php?tid=469) |
Toolbox Droid 3D Model - kresty - 06-10-2018 Lars said I could post the 3D model he'd given me, so here's a zip file with his monster STL... Lars' Toolbox Droid 3D Model Pretty big 3D Model of the Toolbox Droid based primarily off the photos from Lee's presentation. Good accuracy. I've also mangled it a bit and attempted to make a 3D Printable toy scale (5.5%) model - This did things like mucked with the tracks and LEDs and stuff to get "toy detail", so don't use it for a full-scale build. Toy Toolbox Droid Shawn mangled Lars' files to make a somewhat printable toolbox droid at the 5.5% toy scale. RE: Toolbox Droid 3D Model - Jabbathehut - 06-15-2018 Hello I have made some more progress with the droid over the last month. But since I'm not ready with the verification of the design I can not share any 100% working printable STL-files at this moment. But if someone wants my 'unfinished' STL-files to play with, PM me! But I have made a STEP file and an E-drawing file for those who can open such files. I will add STL-files as I move along in my own build/verification. You can find the files in the link (Onedrive) below: https://1drv.ms/f/s!AoKNLF7bh0H5gWFfr3Z_g_o58tlh Here is my build site: http://www.r2d2.nu Thanks, Lars RE: Toolbox Droid 3D Model - savagecreature - 06-16-2018 Thank you for sharing your impressive work with us, Lars! Some truly awesome stuff on your website. |