+- RebelDroids.net (http://www.rebeldroids.net/forum)
+-- Forum: Droid Discussions (http://www.rebeldroids.net/forum/forumdisplay.php?fid=6)
+--- Forum: Build logs (http://www.rebeldroids.net/forum/forumdisplay.php?fid=10)
+--- Thread: gnk-138 wip (/showthread.php?tid=359)
gnk-138 wip - grindhouse designs - 04-18-2017
here is the process in pics of gnk-138
this was the beginning right after the face plate, the body is just stacked at this point
RE: gnk-138 wip - kresty - 04-18-2017
Well, you can tell where it's going for sure
PS: In case it's "easier", there's an "images" link up top. Which has "my albums" you can create & upload to. Those images then have a bbcode thing in the info button you can copy the link to.
Unfortunately both mechanisms can be a little bit annoying
So, whatever's easier for you!Anyway, thanks for sharing, looking forward to seeing your progress!
RE: gnk-138 wip - deathproof - 04-21-2017
(04-18-2017, 06:40 PM)grindhouse designs Wrote: here is the process in pics of gnk-138
this was the beginning right after the face plate, the body is just stacked at this point
What's the best way to attach the two halves together?
RE: gnk-138 wip - schubertrr - 04-26-2017
(04-21-2017, 07:55 PM)deathproof Wrote:I used rivets, also seen folks use sheet metal screws. I didn't want to glue them together, in case I wanted back in to do stuff.(04-18-2017, 06:40 PM)grindhouse designs Wrote: here is the process in pics of gnk-138
this was the beginning right after the face plate, the body is just stacked at this point
What's the best way to attach the two halves together?
Sent from my SM-N900V using Tapatalk