RebelDroids.net
Draft flat-cut parts outline - Printable Version

+- RebelDroids.net (http://www.rebeldroids.net/forum)
+-- Forum: Droid Discussions (http://www.rebeldroids.net/forum/forumdisplay.php?fid=6)
+--- Forum: Jedi Training Remote (http://www.rebeldroids.net/forum/forumdisplay.php?fid=21)
+--- Thread: Draft flat-cut parts outline (/showthread.php?tid=334)

Draft flat-cut parts outline - kresty - 03-17-2017

I made a quick pdf file with the outlines of the "patches" of the training remote. 
  • I started from 3D shapes and they kinda match Frank Cerny's scratchbuilt dimensions
  • I haven't actually built them.
  • You need 8x of most sets, and one of the top/bottom pad - but I didn't lay them out since lasers/CnCs may need different arrangements.
If someone actually wants to try these, I can lay them up better for whichever they want, however I'm probably aiming for having these bits integrated into my 3D build, so I probably won't cut them for myself.
[Image: thumb_Draft_Flat_Parts_for_Training_Remote.png]
Draft Training Remote Parts Outlines
I haven't built these, so they may not be correct.  Got dimensions from 3D model, seem to agree with Frank's instructions, but could be wrong.
Not complete for CnC or laser, need laid out better.