+- Rebel Droids.net (http://www.rebeldroids.net/forum)
+-- Forum: Droid Discussions (http://www.rebeldroids.net/forum/forumdisplay.php?fid=6)
+--- Forum: MSE mouse droids (http://www.rebeldroids.net/forum/forumdisplay.php?fid=9)
+---- Forum: Build Logs for MSE-6 Mouse Droids (http://www.rebeldroids.net/forum/forumdisplay.php?fid=37)
+---- Thread: MSE-6 Build notes (/showthread.php?tid=212)
RE: MSE-6 Build notes - kresty - 10-24-2016
Cool!!! That's just a scratch, Lara knows battle damage!
RE: MSE-6 Build notes - Roger Booth - 11-12-2016
Today, I actually got some time to myself to finish the droid.
The couple of jobs were installing the Arduino for controlling the lights and a quick paint job to give a distressed look.
The Arduino was pretty straight forward and I have three different flash intervals for a bunch of lights along with a single morse code flash for one light. The code is a little primitive and I'm sure there's a much simpler code to do the same job but it works how I want and is easy to adjust so I'm going to leave it for now.
[attachment=131]
Not sure if it was such a good idea but I've added a stencilled 'empire' logo on the back which I think I will distress a little more, it didn't come out as clean as I would have liked but it's something I can work on (or get rid of!!)
[attachment=132]
I used a grey and grey brown emulsion wash over the two halves of the shell then added some grate polish over the top to add a black metallic effect, looks good in bright sunlight but I think I might continue to work on the aged look.
RE: MSE-6 Build notes - Roger Booth - 11-12-2016
A couple of better pictures, getting dark now.
[attachment=133]
[attachment=134]
RE: MSE-6 Build notes - kresty - 11-13-2016
Looks pretty cool, very blinky!
RE: MSE-6 Build notes - savagecreature - 11-13-2016
cool
Kinda like the "squad car" version.
RE: MSE-6 Build notes - Roger Booth - 11-13-2016
A short film from before lights and sounds
RE: MSE-6 Build notes - savagecreature - 11-16-2016
It's always so blasted fun to see any robot drive around.
RE: MSE-6 Build notes - Roger Booth - 06-09-2017
My 'Rebels' mouse will soon be having a face lift. I've managed to get my hands on a set of 3D printed top greeblies, these were obtained from RWA Creations in the UK.
[attachment=195]
More on the transformation soon.
RE: MSE-6 Build notes - Roger Booth - 06-20-2017
few extra bits added and primed ready for paint
[attachment=197]
RE: MSE-6 Build notes - kresty - 06-20-2017
Those look great. I love White Mouse Parts.