The following warnings occurred:
Warning [2] Creating default object from empty value - Line: 11 - File: inc/plugins/tapatalk.php PHP 7.4.10 (Linux)
File Line Function
/inc/plugins/tapatalk.php 11 errorHandler->error
/inc/class_plugins.php 38 require_once
/inc/init.php 233 pluginSystem->load
/global.php 18 require_once
/printthread.php 16 require_once



RebelDroids.net
Pit Droid Ponderings - Printable Version

+- RebelDroids.net (http://www.rebeldroids.net/forum)
+-- Forum: Droid Discussions (http://www.rebeldroids.net/forum/forumdisplay.php?fid=6)
+--- Forum: Pit Droids (http://www.rebeldroids.net/forum/forumdisplay.php?fid=20)
+--- Thread: Pit Droid Ponderings (/showthread.php?tid=33)

Pages: 1 2 3 4

RE: Pit Droid Ponderings - savagecreature - 06-12-2018

'nother progress report

[Image: normal_dome_02.PNG]


RE: Pit Droid Ponderings - kresty - 06-12-2018

So... when do you start sharing? Smile

RE: Pit Droid Ponderings - savagecreature - 06-18-2018

I had things I had to do over the weekend, but while I was doing them I went ahead and threw some parts on the printer to see how they all fit together, etc.

Since kresty had one the original print test at 25%I figured I'd do the same to allow for a more direct comparison. It was interesting because reducing it to a quarter of it's actual size brought the 1/8 inch thick walls down to 1/32. That's pretty thin.   However, it seems to have worked pretty darn well. The only difficulty was the thinness allowed for a bit more flexibility in everything than I might have liked, so it didn't assemble as accurately as I wanted. 

[Image: normal_pit_dome.jpg]

[Image: normal_pit_dome2.jpg]


RE: Pit Droid Ponderings - kresty - 06-18-2018

IIRC the original head I printed was "solid", so that'd be a big difference.

Looking great!